| Fa |
SabzKoosh Negin
Gardening machines
Green space machines
Agricultural machines
Others
About us
Agents
|
||
 |
|
 |
BCS Italy
tractor grass cutter Duplex
| model: | tractor grass cutter Duplex |
| min required power: | 20hp |
| working width: | 182cm |
| blade type: | two sided |
| working area per hour: | 800-1000m2/h |
| working speed: | 20km/h |
| permissible distance of the ability axis: | 540rpm |
| blades: | 24 |
| angle adjustment: | up to 90+ and 55- degree |
| other facilities: | hydraulic control system and jack |
ویدئو
Description:
CommentsThe Duplex are double knife cutter bars, where the knives and teeth move simultaneously in opposite directions.
The perfect ‘scissor-cut’ of the Duplex severs the stalks of the forage in a clean cut without any fraying, keeping its nutritional value intact. This type of cut also allows rapid and lush re-growth of the turf.
The reduced power absorption and limited weight allow the Duplex to be used also with low power tractors as well as on caterpillar machines.
Eight versions of the Duplex are available depending on the cutting width and the type of tooth:
- Duplex 1.68 Gold or ST: 1.68 m cutting width
- Duplex 1.82 Gold or ST: 1.82 m cutting width
- Duplex 2.12 Gold or ST: 2.12 m cutting width
- Duplex 2.42 Gold or ST: 2.42 m cutting width
The Gold version is distinguished by double section teeth (distance between tips of 76 mm), while the ST version is distinguished by triple section teeth (distance between tips of 50 mm) and it is recommended for stony soils.
The compact and sturdy load-bearing frame was devised to minimise the overhang of the cutter bar with respect to the tractor and to optimise weight distribution.
The hydraulic lifting, supplied as standard, allows the positioning of the bar from +90° (i.e. vertically) during field manoeuvres and during road transfer, and it operates trouble-free up to - 55° with respect to the horizontal plane.
Related content:
Phone number: 66566767 021
کلیه حقوق این وبسایت متعلق به شرکت سبزکوش نگین می باشد